5 Reasons to Choose Toro Hydraulic Hoses

This is Number 7 in our series on the importance of using genuine Toro parts. This time the subject is Toro hydraulic hoses.

Your Toro equipment is just as good as its hydraulic hose. Though it looks low-tech, it is critical to the smooth running of the Toro turf equipment that you depend on to get the job done. The entire hydraulic system relies on the durability of its hoses, which is why there are many hydraulic hose suppliers out there that can help provide you with the tools that you need.

Here is a look at 5 ways genuine Toro hydraulic hoses keep your turf equipment working reliably.

#1. Leak-Free Port Stud

Toro-brand port studs use the latest technology, providing a positive stop for the locknut. They remove the chance of backup washer damage, one of the major causes of leaks. Even out in the field, they allow for quick and easy installation, virtually eliminating the chance of mistakes in assembly.

#2. The Right Size

Does this sound familiar? You need to replace a hose. You have generic ½-inch hose on hand. But your equipment uses 5/8-inch hose. Close enough? No, and here’s why.

The difference is tiny, but critical. It can lead to restricted oil flow. Or the back-pressure might be too much. Both of these problems mean hose failure, and ultimately equipment failure. Don’t risk downtime and repair cost. Go with Toro hoses instead of the DIY variety.

#3. Safe Couplings

When you use Toro couplings, you don’t need to worry about the right length. Users sometimes don’t realize that the wrong fit can lead to major damage. Consider the case of a 12-inch hose, using a 10-inch coupling on each end.

For convenience, you might choose to go with 2-inch couplings because that’s what you have in stock. But the result could be a blown hose. That’s because specs for your hose are 10 inches of flex. But now it has just 8 inches. Don’t take chances, use genuine Toro couplings that are made to fit right. If you would like to find out more about safe couplings you can redirect to california industrial rubber co. for more information.

#4. Custom O-Ring Trap Seal

The O-Ring designed by Toro has a trap-seal that is made to prevent the chance of a full or partial pop out, a common problem with generic O-rings. When you use the real thing, you don’t have to worry about damage to the seal and leaks. It also adapts for a standard half-dovetail groove.

#5. Immediate, No-Fuss Fit

When you use Toro parts, you have the component you need in the right size. Just attach it and you’re ready to go. It connects quickly and easily.

On the other hand, you increase your risk of failure and damage with do-it-yourself hoses. There is much more involved than just measure, cut, crimp and replace. Each hose much meet the exact specifications for each equipment model, including length, diameter, surge loads, bend radius and strength, and pressure. When you use a makeshift hose, the chance for breaks, leaks and damage is much higher. If you do find that your hydraulic hose has experienced some damage, you can easily find some hydraulic hose repair in Sydney to sort it for you.

How to Keep Your Hydraulic Systems A-OK

A preventive maintenance routine is the most cost-effective way to keep your Toro turf equipment running dependably, season after season. Your routine should include the following four tasks:

• Inspect the system daily, looking for signs of leaks.
• Check the reservoir fluid. If it looks milky, it needs replacing.
• Replace the hoses every two years. All you need is a single part number for the Hose Replacement Kit, which includes all the hoses for each model.
• Replace O-Rings at the same time you do the hoses.

Toro Hydraulic Hoses give you Peace of Mind

Using parts made for your Toro equipment reduces worry because you know the hydraulic hose you use will fit and function correctly. These hoses meet the exacting engineering specifications needed to keep your turf machine in peak condition. The right parts can add years to the lifespan of your equipment.

The combination of genuine Toro hydraulic hoses and scheduled maintenance will keep your equipment running smoothly for years to come.